Ultrapro DisplayPort 1.4 Active Optical Cable

8K Fiber Optic DisplayPort 1.4 Cable (8K @60Hz, 4K @144Hz, 1440p @240Hz)

8K Fiber Optic DisplayPort 1.4 Cable (8K @60Hz, 4K 144Hz, 1440p @240Hz)

Name: 8K Fiber Optic DisplayPort 1.4 Cable (8K @60Hz, 4K 144Hz, 1440p @240Hz)
Brand: UNITEK
SKU: C1615GY
Price: 69.99 USD
Availability: InStock

$69.99 USD

SKU: C1615GY

Length:5M

Variante

Product Overview:

Unparalleled 8K 60Hz definition
Maximum 240Hz ideal for immersive entertainment
Optical / Electrical solution for lossless transmission
32.4Gbps bandwidth
Reliable latch, zinc-alloy housing and gold-plated connectors

UNITEK DP 1.4 active optical cable with the specification which offers the ideal values for every frame up to 8K unparalleled visual, and up to 240Hz refresh rate to let you enjoy the immersive entertainment and gaming experience. The optical solution ensures the mass signal will be transmitted in a lossless way even long distance.

Product Features:

DisplayPort (DP) 1.4 specification with 32.4Gbps mass-capacity bandwidth. Backward compatible.
Designed for transmitting up to 8K@60Hz unparalleled visual, as well as 3D display signal in a lossless way even a long distance.
Refresh rate at 120Hz while under 4K, ultra-fast motion UHD images to be crisp and razor-sharp, and higher refresh rate when using lower resolution.
With High Dynamic Range (HDR), contrast, depth, brightness and wider color gamut are shown at ideal values.
With Display Stream Compression (DSC) version 1.2, increasing the compression ratio up to 3:1 to ensures the increased resolutions and color depths can be transferred smooth, lossless and low-latency.
With Forward Error Correction (FEC) which overlays the DSC 1.2 transport, addresses the transport error resiliency needed for compressed video transport to external displays.
DP1.4 expands audio transport capabilities such as 32 audio channels, 1536kHz sample rate and more.
Made with strong zinc-alloy housing and corrosion-resistant gold-plated connector.
Thoughtful and reliable latch connector.
High resistance against surrounding electromagnetic interference. Safe for everyone via the nil-radiation environment.

Hardware & Dimension:
Material: Zinc-alloy Housing & Gold-plated Connector
Color: Space Grey
Upstream: DisplayPort Male
Downstream: DisplayPort Male
Chip: Optical / Electrical Conversion Chip
Cable Length: 5M/ 10M/ 15M/ 20M/ 30M
Cable OD: 4.8mm

Package Content:
1 x 8K Fiber Optic DisplayPort 1.4 Cable
1 x User Manual

Cantidad:

Shipping cost will be calculated during checkout. International duties & taxes may apply and are not calculated at checkout.

For shipping quotes, "Checkout" the item you want to buy, enter your shipping details and the shipping rates will automatically generate based on the item's weight and the delivery location.
If the shipping rates do not generate,  please contact us.

Normal Shipping Times: 3-14 business days
The final shipping days are according to your local because of COVID-19 guidelines.

Delays:
Unitek is not responsible for delays in shipping caused by extraneous factors (such as incorrect addresses, weather, inspections, labor disputes, and/or transportation problems). We cannot be responsible for lost or damaged packages. 

Duties & Taxes:
Orders shipped outside of the United States may be subject to import taxes, customs duties, fees, and/or VAT (Value Added Taxes) levied by the destination country. You are responsible for paying any taxes, duties, customs fees, and/or VAT charged by your government, as UNITEK has no control over these charges and cannot predict what they may be. Please contact the local customs office in the relevant jurisdiction for additional information on customs policies or duties. International orders will not be refunded for failure to pay import duties, taxes or fees.

Global Shipping Notes:
For customers in Korea, please fill in your Korean Name (not in English) which must correspond to the Personal Custom Code;
For customers in Taiwan, please fill in the ID number;
For customers in South Africa, please fill in the ID number;
For customers in Chile, please fill in RUT.

For any other questions or inquiries, please contact us.

There is no video signal transmission. What should I do?

There are some quick checks if you are trying to troubleshoot issues with a video cable.
You may test the connected devices to make sure that the following components are working correctly and are not the source of the issue:
·      Video cable
·      Video source
·      Video destination
Try the following methods to test your video setup components:
·      Use the video cable, video source, and another video destination (display) to setup to see if the problem is with the components.
·      Use a different video cable, video source, and the original video destination in your setup to see if the problem persists.
Ideally, you should test a component that you know works in another setup. Otherwise, the issue might happen because of the port function of your video source, or a driver issue.
When you test the video setup components, it is recommended that you do the following:
·      Investigate that the source resolution matches the capabilities of the video destination. For example, if the video destination is only capable of 720p, then the video source cannot output 1080p, as that exceeds the capabilities of the video destination.
·      Test at a lower resolution, for example, 1024 x 768.
·      If you are using 4K resolutions, test with a shorter cable and test each of them individually.
If you are experiencing issues with audio over HDMI/DisplayPort, investigate the following:
·      The output audio over HDMI/DisplayPort setting on the source.
·      The compatible audio format on the destination and the source file format on the source.
·      The destination's volume was raised.
·      Take out the 3.5mm device if it is connecting to the hub.
·      Note: HDMI/DisplayPort to DVI/VGA cables, adapters and converters do not support audio.

Why my mouse does not move properly between the displays?

We suggest you to rearrange the monitors in Windows to match the physical location of them on your desk.
Go through the following:
Windows 10 / 8
1. Press the Windows Key plus X and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column, which will display your monitors as numbered icons.
4. Click Identify to display the numbers on each connected monitor, showing how the operating system has assigned their positions.
5. Click and drag the monitor icons to best match the physical location of monitors.
6. Click OK to apply the changes and close the window.
Windows 7 / Vista
1. Click the Start button and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column, which will display your monitors as numbered icons.
4. Click Identify to display the numbers on each connected monitor, showing how the operating system has assigned their positions.
5. Click and drag the monitor icons to best match your physical setup.
6. Click OK to apply the changes and close the window.
Windows XP
1. Click the Start button and select Control Panel.
2. Double-click Display.
3. Click the Settings tab, which will display your monitors as numbered icons.
4. Click Identify to display the numbers on each connected monitor, showing how the operating system has assigned their positions.
5. Click and drag the monitor icons to best match your physical setup.
6. Click OK to apply the changes and close the window.

How do I set to mirror my primary display onto my secondary display in Windows?

Go through the following:
Windows 10 / 8
1. Press the Windows Key plus X and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column.
4. Expand the drop-down menu next to “Multiple displays” and select Duplicate these Displays.
5. Click OK to apply the changes and close the window.
Windows 7 / Vista
1. Click the Start button and select Control Panel.
2. Click Appearance and Personalization, then click Display.
3. Click the Resolution or Adjust Resolution option from the left column.
4. Expand the drop-down menu next to “Multiple displays” and select Duplicate these Displays.
5. Click OK to apply the changes and close the window.
Windows XP
1. Click the Start button and select Control Panel.
2. Double-click Display.
3. Click the Settings tab.
4. Un-check the box beside Extend my Windows desktop onto this monitor.
5. Click OK to apply the changes and close the window.